add share buttons

Estimating The Cost Of Wood Privacy Fence Installation

Cost of fencing is calculated as the cost per linear foot. The easiest way to estimate costs is to determine the cost of a single fence panel and then multiply that times the cost of the number of panels needed to achieve the total length of the fence.

First, measure the perimeter of the area to be covered – this time do make note of any special circumstances which would affect the cost of such a gate (s) or difficult terrain. If the existing fence will be replaced with new material and then just count the number of fence panels is present. In case you are looking for a fence installer then check this source: PVC Fence Installations- Award Winning- All Island Fence.

Image result for Estimating The Cost Of Wood Privacy Fence Installation

Image Source: Google 

Wooden privacy fence posts are almost always spaced 8 feet apart from the center (this means the measurement from the center of one post to the center of the adjacent post is 8 feet) but always measured to confirm.

Wood available in standard 8-foot lengths and offer a balanced solution cost and power.

Spans more than 8 feet will have a problem with sagging except 2×4 Joist upgraded to 2×6 dimensions – it also changes the appearance of the fence panel.

A short span of 8 feet is usually not necessary, the fence will be stronger but material costs increased substantially.

If there is a need to set up posts in several other long, be sure to choose a rise of 2 feet (that is 6 feet, 8 feet, 10 feet, 12 feet, etc.) if the installation will require each joist to cut to length.

Fence posts should be pressure treated timber and given to the contact with the ground. Galvanized steel fence posts offer a longer life after a higher initial cost for post and rail brackets required posts.